Fast, Reliable Gate Installation Across Ardmore
Gate installation in Ardmore, PA typically runs $2,800-$8,500 depending on gate type, automation, and whether existing stone pillars need repair. Most Ardmore jobs take one to three days, with same-week scheduling available. Call (833) 624-0726 for a free, upfront estimate.
We’ve been driving out to Ardmore from Philadelphia for over four decades, and we know the difference between a gate job on the Main Line and one anywhere else in the Delaware Valley. The wrought-iron estate gates along Lancaster Avenue and the stone-pillared entries off South Wynnewood Road aren’t hardware-store kits. They’re legacy ironwork, often original to homes built between 1890 and 1940, hung on Pennsylvania fieldstone that’s been heaving and settling through freeze-thaw cycles for a hundred years or more. When an Ardmore homeowner calls us, we’re not just installing a gate. We’re working with historic masonry, corroded heritage hardware, and Township zoning requirements that don’t exist in newer communities. That’s why Ardmore residents call us back, and why they refer us to their neighbors.
Why Ironworks Gate Co. of Philadelphia Is Ardmore’s Preferred Gate Installation Company
Our reputation in Ardmore was built one job at a time, starting with the estate properties along Montgomery Avenue and spreading by word through the neighborhoods around Suburban Square. Homeowners here talk to each other. They remember which contractor showed up on time, which one left the stone work intact, and which one stood behind the job when a hinge shifted six months later.
We answer our phone live, 24 hours a day, 7 days a week. Not an answering service. A real person who knows gates, who can dispatch a technician to Ardmore usually within the same day or next. Our background-checked, uniformed technicians work under our K.E.Y.S. code: Krafted right, Every time, Your home first, Standing behind it. The 400th job gets the same care as the first. And every installation is protected by our 90-Day Done Right Promise, the Keystone Standard: written, no paperwork, no arguing. If it’s not right, we come back and make it right.
We don’t subcontract. We don’t send a handyman with a drill. Our crews carry welding equipment, masonry repair kits, and certified training on nine automation brands including FAAC, BFT, and Viking, so the correct fix happens on the first visit. That’s the difference between a gate company and a company that happens to install gates.
Our Gate Installation Services in Ardmore
Swing Gate Installation
Swing gates dominate Ardmore’s older properties, and for good reason. They suit the scale of Victorian and Tudor Revival driveways, and they pair naturally with the existing fieldstone pillars that anchor so many Main Line estates. We install single and double swing gates in steel, aluminum, and wrought-iron, with manual or automated operation. On older Ardmore homes, we almost always need to assess pillar stability first. The freeze-thaw cycles here heave stone posts out of plumb, and a new gate hung on a leaning pillar will bind, sag, and fail within a season. We handle that prep work in-house, including hinge-plate reset and mortar repointing, so your swing gate closes like it was meant to.
Pedestrian Gate Installation
The walk-through gates between Ardmore properties, along Lancaster Avenue sidewalks, and at the rear of Suburban Square-area homes take more abuse than people realize. They’re opened a dozen times daily, exposed to sidewalk salt in winter, and often original to the house. We install replacement pedestrian gates that match existing ironwork profiles, or we can fabricate custom pieces to complement your home’s architecture. Because many Ardmore pedestrian gates sit within historic-district boundaries, we verify Township requirements before fabrication begins, saving you from a stop-work order after installation starts.
Double Gate Installation
Double gates, or biparting driveway gates, are the classic statement for Ardmore’s estate-era homes. They require precise alignment, since both leaves must meet dead-center without dragging or binding. On Ardmore’s settled ground, that precision is even harder. We measure pillar plumb, grade slope, and swing arc before ordering a single component. Our double gate installations include drop-rod hardware, center stops, and your choice of manual or automated operation. We’ve fitted double gates on properties from Wynnewood Road to Rittenhouse Place, each one adjusted to its specific stone pillars and grade.
Sliding Gate Installation
Where driveway slope makes swing gates impractical, or where the entry is tight against Ardmore’s narrow side yards, a sliding gate is the right solution. We install cantilever and track-mounted sliding gates with heavy-duty rollers and automated openers rated for the gate’s weight and wind load. Sliding gates require level ground and proper drainage, which we assess on every Ardmore site visit. The freeze-thaw heave that affects stone pillars can also shift track foundations, so we engineer the base accordingly.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Ardmore
We carry certification and stock parts for nine major automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Ardmore homeowners, that means no waiting two weeks for a specialty part to ship from California. Our trucks leave Philadelphia stocked with FAAC and BFT control boards, Viking actuator arms, and Linear access hardware. Most Ardmore automation retrofits are completed in a single visit because we diagnosed the brand and brought the correct components. If your existing opener is salvageable, we’ll tell you. If it’s past service life, we’ll quote the replacement upfront, with no surprises on the bill.
Common Gate Installation Problems We See in Ardmore Homes
- Fieldstone pillar heave and mortar failure. Ardmore’s freeze-thaw cycles shift stone pillars out of plumb every winter. A new gate hung on a leaning pillar will bind and sag. We repoint mortar and reset hinge plates as standard prep on most Ardmore installations.
- Corroded original hinges welded to wrought-iron frames. Many Ardmore gates have hinges that haven’t been removed in eighty years. The steel is often fused to the frame. We cut, fabricate, and weld replacement hinge assemblies in the field rather than forcing a generic bracket that won’t fit.
- Historic-district permit delays. Lower Merion Township requires review before replacing period ironwork on designated properties. Homeowners who skip this step face stop-work orders. We verify requirements before fabrication, and we document repair-over-replacement options that may avoid review entirely.
- Undersized or obsolete openers on heavy legacy gates. A 1920s wrought-iron double gate can weigh 400 pounds or more. The original opener, or a big-box replacement, strains and fails. We spec actuators with proper duty cycles and weight ratings, matched to the actual gate, not the budget.
Pricing for Gate Installation in Ardmore, PA
Here’s what gate installation costs in Ardmore’s market, based on jobs we’ve completed from Montgomery Avenue to Cricket Avenue:
| Gate Type | Typical Range in Ardmore |
|---|---|
| Single swing gate, manual, no pillar repair | $2,800-$4,200 |
| Double swing gate, manual, no pillar repair | $4,500-$6,800 |
| Pedestrian gate with custom ironwork match | $1,800-$3,500 |
| Sliding gate with track and automation | $5,500-$8,500 |
| Automation retrofit on existing gate | $1,800-$3,200 |
| Fieldstone pillar repointing and hinge reset | $800-$2,400 |
These ranges reflect Ardmore’s specific conditions: older masonry that often needs prep work, custom fabrication for period ironwork, and the occasional historic-district documentation requirement. We settle on an exact, upfront price before turning a single bolt. No surprises on the bill. Estimates are free, and our $89 Seasonal Tune-Up can identify problems before they become expensive failures. Seniors and veterans receive 5% off every job, always.
We Also Serve Cities Near Ardmore
Our crews work throughout the Main Line and western Philadelphia suburbs, including Ardmore, Penn Wynne, Bala-Cynwyd, Drexel Hill, and Radnor. Each community has its own housing stock and its own gate problems. We know the difference. Call (833) 624-0726 and we’ll tell you when we can be there.
Serving Ardmore, PA - Our Local Coverage Area
We’re based in the Ardmore area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Ardmore
You may. Lower Merion Township enforces strict zoning standards and, on designated historic properties, requires Township review before replacing period ironwork. We verify this requirement during our initial site visit and can often recommend repair-over-replacement strategies that avoid the approval process entirely. Call (833) 624-0726 to schedule a free assessment.
No, and we won’t try. A gate hung on a leaning or heaved pillar will bind, sag, and fail within months. We repoint fieldstone and reset hinge plates as standard prep work, then install the gate on stable masonry. On South Wynnewood Road, we replaced a pair of corroded LiftMaster chain-drive openers on a 1920s swing gate. The cast-iron hinges had shifted 2 inches from pillar heave, so we first repointed the fieldstone and reset the hinge plates before retrofitting the new openers, saving the owner from a costly pillar rebuild. Call (833) 624-0726 for an exact quote.
Most Ardmore installations take one to three days. Day one is assessment, pillar prep, and hinge work. Day two is gate hang and automation. Complex custom fabrication or historic-district documentation can add time, which we build into our upfront schedule and price. Call (833) 624-0726 to book your installation window.
We are certified and equipped to install and service nine major brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Ardmore’s heavier legacy gates, we typically recommend FAAC, BFT, or Viking actuators for their duty-cycle ratings and reliability in freeze-thaw conditions. We stock parts locally for fast turnaround. Call (833) 624-0726 to discuss the right opener for your gate weight and usage.
Yes. We fabricate custom ironwork to match existing profiles, or we can source heritage-style components that complement your home’s architecture. For Ardmore’s historic-district properties, we document the original design and propose replacements that meet Township aesthetic requirements. The first step is a site visit with photos and measurements. Call (833) 624-0726 to arrange yours.
Ready to get your Ardmore gate done right? Call Ironworks Gate Co. at (833) 624-0726 for a free, upfront estimate. A live person will answer, 24 hours a day, 7 days a week. We’ll be there when we say, we’ll settle the price before we start, and we’ll stand behind it with our written 90-Day Done Right Promise.
Written by Gerald Mancuso, Owner at Ironworks Gate Co., serving Ardmore and the Philadelphia area since 1984.