Fast, Reliable Gate Installation Across Collingdale
Gate installation in Collingdale, PA typically runs $1,200-$4,500 depending on gate type, with most pedestrian and alley-access projects completed in a single day. Our Gate Installation team has been working in Delaware County boroughs like yours since 1984, and we understand the constraints of narrow alley lots and century-old masonry that general contractors often underestimate.
We’re usually on-site in Collingdale within 45 minutes of your call. That matters when your alley gate is binding against the pavement and blocking Monday morning trash pickup, or when a leaning post has swung your gate into the shared accessway. Call (833) 624-0726 and a live person will answer, 24 hours a day.
Why Ironworks Gate Co. of Philadelphia Is Collingdale’s Preferred Gate Installation Company
We’ve been crossing MacDade Boulevard into Collingdale for over four decades. Gerald Mancuso founded this company in 1984 on the principle that a gate should close the way it did the day it was hung, and that promise hasn’t changed for the 400th job or the four-thousandth.
Collingdale homeowners remember the last contractor who didn’t show, or who left posts out of plumb, or who vanished when the latch failed a month later. We don’t work that way. Our 90-Day Done Right Promise, the Keystone Standard, is written on every invoice: if it is not right, we come back and make it right. No paperwork to file, no argument, no exceptions.
Every technician who steps onto your property is background-checked, uniformed, and working under our K.E.Y.S. code: Krafted right, Every time, Your home first, Standing behind it. We treat your alley gate with the same care we’d bring to our own mother’s home.
And when you call (833) 624-0726, a live person answers. Not a voicemail tree. Not an answering service that promises a callback Monday. A real voice, any hour, any day.
Our Gate Installation Services in Collingdale
Pedestrian Gate Installation
On Collingdale’s narrow alley-access lots, the pedestrian gate is often the primary entry point, not a side feature. We install self-closing pedestrian gates with adjustable hinge systems designed for the tight clearances between 1920s brick rowhouses. On a recent job on Clinton Street, we replaced a 1940s swing gate that had seized on its original iron posts after decades of freeze-thaw heave. We installed a new LiftMaster pedestrian gate with a self-closing hinge system, adjusting the posts to plumb using shim kits to avoid encroaching on the neighbor’s side - a common Collingdale constraint. Most pedestrian gate installations in Collingdale run $1,200-$2,400.
Swing Gate Installation
Swing gates remain the most practical solution for Collingdale’s rear-yard and alley-access entries, but they demand precise post alignment that aging brick and iron supports rarely provide. Our crews carry structural reinforcement kits specifically for posts that have settled unevenly over 80-100 years of freeze-thaw cycles. We can restore plumb without full replacement in most cases, saving you the cost and complication of encroaching on a neighbor’s property line. Typical swing gate installation in Collingdale: $1,800-$3,200.
Sliding Gate Installation
Sliding gates solve the clearance problem on Collingdale’s tightest lots, where a swing arc would scrape the adjacent fence or building wall. We measure your alley width to the inch - many Collingdale accessways are barely 36 inches clear - and specify track systems that mount without disturbing existing masonry. Not every alley can accommodate a slider, but when it fits, it eliminates the binding and scraping that plague swing gates on shifted posts. Sliding gate installations typically run $2,800-$4,500 in this market.
Security Gate Installation
For Collingdale homeowners who want controlled access without sacrificing the borough’s traditional streetscape, we install security gates that respect the architectural character of pre-WWII brick housing. Our security gate installations integrate with access control systems from DoorKing and Viking, mounted on reinforced original posts where possible. We handle the wiring and automation, not a subcontractor. Security gate projects in Collingdale generally fall between $2,400-$4,200 depending on access control features.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Collingdale
We are trained and equipped on nine gate-automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Collingdale customers, this means we stock parts for the systems most common in Delaware County - Linear and Viking among them - so your repair or installation doesn’t wait on a warehouse shipment. We make the correct fix on the first visit, whatever is on your driveway or alley.
Common Gate Installation Problems We See in Collingdale Homes
- Post lean from freeze-thaw heave. Southeastern Pennsylvania’s temperature swings from November through March cycle water through shallow concrete footings, pushing posts outward year after year. A post that shifts even two inches can swing a gate into the alley and block trash collection or utility access. Plumb-post restoration is our most requested service here, not just latch replacement.
- Unevenly settled original brick or iron posts. Gates mounted in the 1920s-1940s sit on footings that were shallow by modern standards and have compounded decades of settlement. New gate frames cannot mount square without structural reinforcement or careful shim work that respects shared property lines.
- Tight alley clearances causing scrape and bind. On lots where there is virtually no room to reframe a post without encroaching on a neighbor’s space, even minor misalignment leads to gate scraping against adjacent walls or fences. We measure twice and fabricate to fit.
- Original ornamental iron gates past functional life. Many Collingdale homes still have their original iron or early chain-link rear-yard gates, often beautiful but no longer serviceable. We can replicate traditional styling in modern materials, or restore original iron where the frame remains sound.
Pricing for Gate Installation in Collingdale, PA
We settle on a square deal before turning a single bolt: upfront price, no surprises on the bill.
| Gate Type | Typical Range in Collingdale |
|---|---|
| Pedestrian gate (manual) | $1,200 - $2,000 |
| Pedestrian gate (automated) | $1,800 - $2,800 |
| Swing gate (single, manual) | $1,800 - $3,200 |
| Swing gate (automated) | $2,600 - $4,000 |
| Sliding gate | $2,800 - $4,500 |
| Security gate with access control | $2,400 - $4,200 |
What moves the number: post condition (restoration versus replacement), automation features, access control integration, and the structural complications of working on century-old masonry in tight quarters. We offer free estimates at your property - call (833) 624-0726 to schedule. Active discounts include $50 off any repair over $250, a permanent 5% Senior and Veteran discount, and our $89 Seasonal Tune-Up to catch problems before they bind your gate.
We Also Serve Cities Near Collingdale
Our crews work throughout inner Delaware County, including Gate Installation in Collingdale and neighboring Darby, Sharon Hill, Clifton Heights, and Lansdowne. The same 90-Day Done Right Promise, the same live-answer phone, the same upfront pricing applies whether we’re on Clinton Street or across MacDade Boulevard.
Serving Collingdale, PA - Our Local Coverage Area
We’re based in the Collingdale area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Collingdale
In most Collingdale cases, yes. We use structural shim kits and post braces to restore plumb without full replacement, which matters on narrow lots where encroaching on a neighbor’s space is not an option. We will assess the footing depth and masonry condition on-site. Call (833) 624-0726 for a free estimate - estimates are free.
Sometimes. If the original frame is sound and posts can be reinforced to modern load requirements, we can mount automation from Ghost Controls or DoorKing while preserving the gate’s character. If the iron has thinned or welds are cracked, we will tell you straight and fabricate a matching replacement. Call (833) 624-0726 and we will look at it.
Thirty-six inches is tight but workable for a single-track sliding pedestrian gate. We measure your exact clearance, including any slope in the alley pavement, and specify a low-profile track that won’t trip foot traffic or snag trash wheels. Swing gates often fail in these clearances; sliders eliminate the arc problem entirely. Call (833) 624-0726 to discuss your layout.
A manual pedestrian gate installation in Collingdale typically runs $1,200-$2,000; automated pedestrian gates run $1,800-$2,800. The age and condition of your existing posts is usually the biggest variable. We offer free estimates and our $89 Seasonal Tune-Up if you want to assess condition before committing. Call (833) 624-0726.
Yes, and we are accustomed to the shared-property-line constraints of Collingdale’s rowhouse alleys. We work within your lot boundaries, document our footing placements, and when needed, coordinate with adjacent owners to avoid disputes. Our technicians are trained to treat your neighbor’s property with the same respect as yours. Call (833) 624-0726 to discuss your specific situation.
Written by Gerald Mancuso, Owner at Ironworks Gate Co., serving Collingdale and Delaware County since 1984.