Fast, Reliable Gate Installation Across Collingswood
A new gate installation in Collingswood typically runs $2,800-$6,500 for most residential properties, with pre-war brick pillar rebuilds adding $800-$2,200 when freeze-thaw damage requires masonry work first. Our Gate Installation team covers all of Collingswood’s 08108 ZIP code, from the historic blocks along Haddon Avenue to the side streets near Knight Park, with same-day response for most calls. We’ve been crossing the river into Camden County for over 42 years, and we know the difference between a gate problem and a pillar problem - a distinction that matters on every narrow lot in this borough.
Call (833) 624-0726. A live person answers, 24 hours a day, 7 days a week.
Why Ironworks Gate Co. of Philadelphia Is Collingswood’s Preferred Gate Installation Company
We started serving Collingswood homeowners in 1984, back when many of the wrought-iron gates we work on today were already 60 years old. Gerald Mancuso built this company on the principle that a gate should close like the day it was hung - whether that day was last week or 1923.
Our technicians are background-checked, uniformed, and trained on nine automation brands including LiftMaster and FAAC. Most Collingswood jobs finish in a single visit. We settle on an upfront price before turning a single bolt. No surprises on the bill.
The 90-Day Done Right Promise - our Keystone Standard - covers every installation. Not right? We come back and make it right. No paperwork, no arguing, no exceptions.
Collingswood’s tight street parking and narrow driveways off Haddon Avenue mean we arrive with fully equipped service vehicles, not a truck that needs to double-park and block traffic. We respect the neighborhood because we plan to be working here for another forty years.
Our Gate Installation Services in Collingswood
Swing Gate Installation
Swing gates remain the practical choice for most Collingswood properties. On the historic residential blocks radiating off Haddon Avenue, brick pillar gate posts are so common that a gate installation call frequently becomes a masonry call first. The mortar between pillar courses cracks, the pillar leans, and no amount of hinge adjustment fixes a gate until the pillar is repointed or rebuilt. We assess the pillar before quoting the gate. A typical single swing gate installation in Collingswood runs $2,800-$4,200, with pillar rebuilds starting at $800.
Driveway Gate Installation
Collingswood’s driveway gates face conditions newer suburbs don’t. The humid Delaware Valley climate with freeze-thaw cycling each winter throws pre-war gate posts out of plumb repeatedly. Seasonal moisture swings accelerate rust on iron gates and rot on older wood gates faster than in drier inland towns. We install driveway gates with stainless hardware and proper drainage detailing because we’ve seen what January ground heave does to a pillar set in 1925.
Pedestrian Gate Installation
Side-yard pedestrian gates are the primary privacy control between tightly packed Collingswood properties. Many are original ornamental wrought iron or early wood, now 80-100 years old. These demand period-appropriate restoration skills, not box-store hardware replacement. When a pedestrian gate is beyond weld repair, we fabricate or source matching designs that respect the home’s original character. Custom pedestrian gate installations in Collingswood typically range $1,800-$3,400.
Sliding Gate Installation
Sliding gates suit some Collingswood properties, but narrow side yards limit access for standard track systems. On residential blocks off Haddon Avenue, we often recommend custom swing gate designs to fit tight clearances instead. When a sliding gate is the right solution, we engineer compact track layouts that work within the borough’s typical 10-15 foot side setbacks.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Collingswood
We carry certification and stock parts for nine gate-automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Collingswood’s older housing stock, this matters. A 20-year-old LiftMaster operator on a pre-war gate is not unusual here, and we can match new installation to existing automation or upgrade the full system. Parts sit on our service vehicles, so most Collingswood customers don’t wait for a second trip.
Common Gate Installation Problems We See in Collingswood Homes
- Rust penetration through century-old wrought iron. The original gates on many Collingswood homes have reached the point where weld repairs or full replacement are necessary before new hardware can be mounted. Surface rust is cosmetic. Structural rust is a safety issue.
- Mortar-deteriorated pillar anchors. Freeze-thaw ground heave cracks the mortar between brick courses, the pillar leans, and the gate misaligns. Gate installation must include masonry assessment. We repoint or rebuild pillars as part of the job.
- Narrow side yards that defeat standard gate designs. Collingswood’s 25-35 foot lot widths mean side-yard gates need custom sizing. A stock 4-foot gate won’t fit a 38-inch opening between houses.
- Original hinge pintles rusted through. On a narrow lot off Haddon Avenue, we replaced a sagging wrought-iron driveway gate with a new swing gate mounted on a rebuilt brick pillar. The original 1920s hinge pintles had rusted through and the pillar mortar was crumbling; we repointed the pillar, set new stainless pintles, and installed a LiftMaster swing gate operator. The homeowner avoids weekly hinge adjustments now.
Pricing for Gate Installation in Collingswood, PA
Gate installation in Collingswood carries specific cost factors tied to the borough’s housing stock. Pre-war brick pillars, period-appropriate hardware, and tight access conditions affect every quote.
| Service | Typical Range in Collingswood |
|---|---|
| Single swing gate (new installation, standard materials) | $2,800 - $4,200 |
| Double swing gate (new installation) | $4,500 - $6,500 |
| Brick pillar repointing or rebuild | $800 - $2,200 |
| Pedestrian gate (custom, period-matching) | $1,800 - $3,400 |
| Gate operator/automation (LiftMaster, FAAC, or BFT) | $1,200 - $2,800 |
What moves the number: pillar condition, gate material (aluminum vs. wrought iron vs. steel), automation level, and whether we’re matching existing architectural details. We settle on a firm price before starting. No surprises on the bill.
Standing offers for Collingswood homeowners: $50 off any repair over $250, free second opinion on any written estimate, $89 seasonal tune-up, and a permanent 5% senior and veteran discount.
Call (833) 624-0726 for a free estimate.
We Also Serve Cities Near Collingswood
Our Gate Installation in Collingswood coverage extends to Audubon, Haddonfield, Haddon Heights, and Cherry Hill Mall. Same 24/7 live answer, same upfront pricing, same 90-Day Done Right Promise.
Serving Collingswood, PA - Our Local Coverage Area
We’re based in the Collingswood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Collingswood
You likely need masonry work first, and possibly a new gate second. A leaning pillar cannot hold a gate plumb, and hinge adjustments will fail within weeks. We assess the pillar’s structural integrity before quoting gate work. In Collingswood, pillar repointing or partial rebuild runs $800-$2,200, and we bundle this with gate installation when needed. Call (833) 624-0726 - estimates are free.
Yes. We fabricate custom gates or source from specialty foundries that reproduce period designs. Collingswood’s Victorian, Craftsman, and Colonial Revival homes deserve hardware that belongs. We bring sample profiles to your estimate. Call (833) 624-0726 to schedule.
Probably not on most Collingswood lots. Standard sliding gates need 18-24 inches of track clearance, and many side yards off Haddon Avenue measure 10-15 feet total. We typically recommend a custom swing gate with compact hardware. We measure on-site and engineer to your exact opening. Call (833) 624-0726 for an exact quote - estimates are free.
In Collingswood’s Delaware Valley climate, expect to check gate alignment annually after hard winters. Proper installation reduces the problem: we set pillars below frost line, use stainless hardware, and engineer drainage to minimize ground heave. The $89 seasonal tune-up catches drift before it becomes a binding or sagging issue. Call (833) 624-0726 to book.
Yes. We are certified on LiftMaster, FAAC, BFT, and six other brands, and we stock parts for legacy and current models. A new gate pairs cleanly with your existing operator if it’s sound, or we upgrade to a new unit with matching automation. Call (833) 624-0726 - we’ll assess what you have and quote both options.
Written by Gerald Mancuso, Owner at Ironworks Gate Co., serving Collingswood since 1984.