Fast, Reliable Gate Installation Across Glenolden
Gate installation in Glenolden typically runs $1,800-$4,500 for a standard pedestrian or swing gate, with most projects completed in one to two days. We’re usually on-site in Glenolden within 24 hours of your call, and every job carries our written 90-Day Done Right Promise.
We’ve been working in Glenolden since 1984, and we know the borough’s narrow rear alleys and original brick row homes the way a local knows the 19036 zip code. Glenolden’s tightly packed grid of 1930s-1950s brick row homes and twins - densely built on lots of under 3,000 sq ft - means nearly every property depends on a narrow rear alley gate or side-yard gate as the primary secured access point for trash pickup, utility meters, and backyard entry. These gates are often original mid-century wrought iron or chain-link and represent the sole barrier between the public rear alley and the property, making functional gate installation a genuine security and access necessity rather than an aesthetic upgrade.
Call (833) 624-0726 anytime - a live person answers, 24 hours a day, 7 days a week.
Why Ironworks Gate Co. of Philadelphia Is Glenolden’s Preferred Gate Installation Company
Glenolden homeowners don’t want promises. They want a crew that shows up when we say, knows the difference between a Darby Creek drainage lot and a higher elevation near Ashland Avenue, and leaves a gate that closes square and stays square. We’ve earned that trust across Delaware County for over 42 years.
Our technicians are background-checked and uniformed, and they work by our K.E.Y.S. code: Krafted right, Every time, Your home first, Standing behind it. The 400th gate installation in Glenolden gets the same care as the first. We settle on upfront pricing before turning a single bolt - no surprises on the bill.
When you call (833) 624-0726, you reach a live person, not a voicemail tree. Same-day appointments are often available for Glenolden, and our shop stocks parts for nine automation brands so we rarely need a second trip.
Gerald Mancuso, who leads Ironworks Gate Co., has built this company on the principle that a written guarantee means nothing unless you honor it without paperwork or arguing. That’s the Keystone Standard, and it applies to every Glenolden job.
Our Gate Installation Services in Glenolden
Pedestrian Gate Installation
Pedestrian gates are the workhorse of Glenolden’s rear alleys. We install wrought-iron, aluminum, and steel pedestrian gates sized for the borough’s standard 32- to 42-inch alley openings, with self-closing hinges and latch hardware rated for daily use by trash haulers, meter readers, and residents. On a row home on Oak Avenue, we replaced a mid-century wrought-iron pedestrian gate that had seized after freeze-thaw cycles shifted its brick pilaster. We used stainless-steel expansion anchors to set new hinges into the aged masonry, paired with a self-closing LiftMaster hinge system to handle the alley’s constant use.
Swing Gate Installation
Swing gates remain the most practical choice for Glenolden’s narrow side yards and alley entries where sliding track space is limited. We account for the Delaware Valley’s freeze-thaw cycles by setting posts below the frost line with proper drainage, and we reinforce hinge mounts for the wind loads that come off Darby Creek. Shallow-set gate posts in low-lying lots near Darby Creek heave during winter, causing misalignment that binds swing gates - we see this constantly, and we spec deeper footings and adjustable hinge systems to prevent it.
Security Gate Installation
Security gates for Glenolden properties need to withstand more than casual intrusion. We install steel-framed security gates with tamper-resistant hinges, welded mesh or picket infill, and optional access control - keypads, intercoms, or remote receivers. For alley-facing installations, we prioritize low-maintenance finishes that resist the accelerated rust from our humid summers.
Sliding Gate Installation
Sliding gates require level ground and track clearance that Glenolden’s older alleys don’t always provide. When site conditions allow, we install cantilever or tracked sliding systems with galvanized steel frames and covered track to shed debris. We measure twice - alley grade, overhead clearance, drainage flow - because a sliding gate that binds in August will freeze solid by January.
Double Gate Installation
Double gates suit wider driveway openings on Glenolden’s semi-detached twins and corner properties. We engineer independent leaf operation with center drop bolts and adjustable center stops, so each gate leaf carries its own weight and the pair meets clean even after years of settling.
Driveway Gate Installation
Driveway gates in Glenolden are less common than alley gates, but where frontage allows, we install aluminum or steel driveway systems with automated openers. Every driveway gate gets wind-load analysis for the exposed conditions along MacDade Boulevard and similar corridors.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Glenolden
Our Gate Installation team is trained and equipped on nine automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Glenolden customers, this means we stock common Linear and Viking control boards, Ghost Controls actuator arms, and DoorKing access hardware at our Philadelphia shop - no waiting two weeks for a part to ship from California. We make the correct fix on the first visit, whatever is on your driveway or alley.
Common Gate Installation Problems We See in Glenolden Homes
- Hinges bolted into brick pilasters pull loose after freeze-thaw cycles. In Glenolden’s rear alleyways, many original cast-iron hinges are bolted directly into aging brick pilasters rather than welded steel posts - a period construction detail that means hinge repair often requires masonry anchoring work alongside metalwork, a combination that catches out technicians who only spec the job from the street side. We carry masonry anchors and know how to set them without splitting aged brick.
- Shallow gate posts heave in low-lying drainage areas. Lots near Darby Creek and other low points in the 19036 zip see repeated post frost-heave that throws swing gates out of plumb. We excavate to proper depth and use concrete footings with drainage stone to prevent recurrence.
- Original chain-link gates fail under wind load. Original chain-link gates in narrow alley openings are under-engineered for wind loads, leading to panel fatigue and frame separation during storms. We replace these with welded steel frames or reinforced aluminum systems rated for local wind conditions.
- Humid summers accelerate hardware corrosion. The Delaware Valley’s humid summers accelerate rust on aging wrought iron and chain-link gate hardware, while the region’s frequent winter freeze-thaw cycles heave gate posts set in shallow soil, causing misalignment and binding that is especially pronounced on the low-lying lots near Darby Creek drainage areas within the borough. We spec stainless or galvanized hardware for every Glenolden installation.
Pricing for Gate Installation in Glenolden, PA
A typical pedestrian gate installation in Glenolden runs $1,800-$2,800, including removal of the old gate, masonry hinge anchoring if needed, and basic latch hardware. Swing gate installations range $2,400-$4,000 depending on width, automation, and whether new posts are required. Security gates with welded steel frames and access control start around $3,200 and can reach $5,500 for larger automated systems. Sliding gates, where site conditions permit, typically fall between $3,500-$6,000.
| Gate Type | Typical Range in Glenolden |
|---|---|
| Pedestrian gate (manual) | $1,800 - $2,800 |
| Swing gate (single, manual) | $2,400 - $3,400 |
| Swing gate (automated) | $3,200 - $4,500 |
| Security gate with access control | $3,200 - $5,500 |
| Sliding gate (where feasible) | $3,500 - $6,000 |
What moves the price: masonry repair to brick pilasters, deeper footings for low-lying lots, automation brand selection, and custom welding for non-standard openings. We settle on a firm price before starting - no surprises on the bill. Call (833) 624-0726 for a free estimate.
We Also Serve Cities Near Glenolden
Our crews work daily across Delaware County. If you’re in Glenolden or nearby Folcroft, Clifton Heights, Norwood, or Sharon Hill, we’re the local gate company that knows your alleys, your building stock, and your building department. Same-day response often available.
Serving Glenolden, PA - Our Local Coverage Area
We’re based in the Glenolden area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Glenolden
Most gate replacements in Glenolden do not require a permit if you’re keeping the same opening size and location, but new installations or structural masonry work may need borough approval. We check Glenolden’s current code requirements before starting every job and handle permit paperwork when needed. Call (833) 624-0726 and we’ll confirm whether your project requires filing.
Yes. We use stainless-steel expansion anchors and masonry-specific drill techniques to set new hinges into aged brick without cracking or spalling the pilaster. This is standard practice for our Glenolden alley installations. We’ll assess your pilaster condition during the free estimate and explain exactly how we’ll anchor the new hardware.
We recommend gates rated for 90-110 mph wind loads for Glenolden properties, particularly exposed frontages along MacDade Boulevard and other open corridors. For rear alley installations shielded by neighboring structures, 70-90 mph ratings are typically sufficient. We engineer every gate to the specific exposure of your site, not a generic spec sheet.
Sometimes, but it depends on level run and overhead clearance. Glenolden’s older alleys often lack the 1.5× gate-width of level track run that sliding gates require, and overhead obstructions like utility lines complicate cantilever systems. We measure grade, clearance, and drainage flow during your free estimate and recommend sliding only when the site genuinely supports it - otherwise, a well-hung swing gate is the more reliable choice.
Usually not. We can often salvage sound wrought-iron frames by cutting out corroded hinge points and welding in new steel hinge bosses, or by installing surface-mounted hinge sets that bypass the original mount locations. If the frame itself is cracked or thinned by rust, we’ll show you exactly what we found and price both repair and replacement options. Estimates are free - call (833) 624-0726.
Ready for a gate that closes like the day it was hung? Call Ironworks Gate Co. at (833) 624-0726 for your free Glenolden estimate. A live person answers 24 hours a day, 7 days a week. We honor our Senior and Veteran 5% discount on every job, and every installation is backed by our written 90-Day Done Right Promise - the Keystone Standard, no exceptions.
Written by Gerald Mancuso, Owner at Ironworks Gate Co., serving Glenolden and Delaware County since 1984.